2001 Acura 3.2TLFACTORY OEM SERVICE PROCEDURE

Engine Performance: Application: Introduction: Introduction: Notes

2001 MODEL COVERAGE

MODEL ENGINE ENGINE ID FUEL SYSTEM IGNITION SYSTEM
Integra 1.8L 4-Cyl. B18B1, B18C1 Or B18C5 SFI Magnetic
MDX 3.5L V6 J35A3 SFI DIS
3.2CL 3.2L V6 J32A1 Or J32A2 SFI DIS
3.2TL 3.2L V6 J32A1 SFI DIS
3.5RL 3.5L V6 C35A1 SFI DIS
Fig 1: VIN Definition
G00009571Courtesy of AMERICAN HONDA MOTOR CO., INC.
Chapter Navigation
Return to Chapter: Introduction
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.