Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSACURA1998INTEGRA GS, 4D SEDAN, AUTOMATICREPAIR AND DIAGNOSISENGINE PERFORMANCESPECIFICATIONSENGINE CONTROLS - SPECIFICATIONSQUICK-SERVICESERVICE INTERVALS & SPECIFICATIONSREPLACEMENT INTERVALS

1998 Acura Integra GS, 4D Sedan, Automatic

Replacement Intervals

1998 Acura Integra GS, 4D Sedan, AutomaticSECTION Replacement Intervals

REPLACEMENT INTERVALS

Component

Miles

Air Filter

30,000

Automatic Transmission Fluid

90,000

Brake Fluid

45,000

Camshaft Timing Belt

⁽¹⁾ 105,000

Coolant

⁽²⁾

Differential

2.5TL, 3.2TL & 3.5RL

⁽³⁾

Engine Oil

7500

Engine Oil Filter

15,000

Fuel Filter

⁽⁴⁾

Manual Transmission Oil

90,000

Spark Plugs

Integra (B18B1), 2.3CL & 2.5TL

30,000

Integra (B18C1 & B18C5)

60,000

3.0CL, 3.2TL & 3.5RL

105,000

Valve Clearance

Integra, 2.3CL ⁽⁵⁾, 2.5TL & 3.0CL ⁽⁵⁾

⁽⁶⁾ 30,000

3.2TL & 3.5RL

⁽⁷⁾

⁽¹⁾	Inspect water pump, replace as necessary.

⁽²⁾	First service at 45K miles. Service every 30K miles thereafter.

⁽³⁾	First service at 60K miles. Service every 30K miles thereafter.

⁽⁴⁾	Replaced when fuel pressure drops below specification. See REGULATED FUEL PRESSURE under FUEL SYSTEM.

⁽⁵⁾	Adjust valves only if noisy.

⁽⁶⁾	Inspect and adjust if necessary, with engine cold.

⁽⁷⁾	Equipped with hydraulic lifters. Adjustments not required.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.