Mode 3

1998 Acura 3.5RL Special EditionSECTION Mode 3

Insert ignition key into ignition switch and place shift lever in "P" position. Press one of the position buttons located on the DPMS switch. Steering column, driver's seat and power mirrors should move to their memorized positions.

SYMPTOM TROUBLE SHOOTING

Symptom Flow Chart No.
Automatic Adjustments
Mode 1 Does Not Work 1
Mode 2 Does Not Work 1
Mode 3 Does Not Work 2
Manual Adjustments
Not Able To Adjust Steering Column 7 & 8
Not Able To Adjust Driver's Seat 3, 4, 5 & 6
With Ignition Switch On, No Mirror Adjustment 10
Others
Driver's Position Cannot Be Stored 9
Position Button Indicators Do Not Come On -
Or Do Not Blink 11
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.