1998 Acura 3.0CLFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.50 OZS. 0.16 L PAG 46 S
Air Cond Refrigerant 1.44 LBS. 0.65 KG R-134a S
Automatic Transmission Fluid Drain and Refill 3.10 QTS. 2.93 L HONDA Automatic Transmission Fluid Premium Formula or DEXRON III Automatic Transmission Fluid DEXRON III may be used as a temporary replacement only, continued use may affect shift quality and result in noise and vibration. S
Automatic Transmission Fluid Total Capacity 7.60 QTS. 7.19 L HONDA Automatic Transmission Fluid Premium Formula or DEXRON III Automatic Transmission Fluid DEXRON III may be used as a temporary replacement only, continued use may affect shift quality and result in noise and vibration. S
Brake Fluid N/A N/A DOT 3 Brake Fluid Use DOT 4 as a temporary replacement. S
Engine Coolant Drain and Refill 5.60 QTS. 5.29 L 50/50 mixture of HONDA Antifreeze/Coolant and water S
Engine Coolant Total Capacity 7.70 QTS. 7.28 L 50/50 mixture of HONDA Antifreeze/Coolant and water S
Engine Oil Drain and Refill,w/Filter 4.60 QTS. 4.35 L API - SJ Energy Conserving, SAE 5W-30 S
Engine Oil Drain and Refill,w/o Filter 4.20 QTS. 3.97 L API - SJ Energy Conserving, SAE 5W-30 S
Engine Oil Total Capacity 5.30 QTS. 5.01 L API - SJ Energy Conserving, SAE 5W-30 S
Fuel Tank 17.00 GALS. 64.35 L S
Power Steering Fluid N/A N/A Genuine HONDA Power Steering Fluid DO NOT use Automatic Transmission Fluid. S
Windshield Washer Fluid 2.60 QTS. 2.46 L Use commercially-available windshield washer fluid only. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.