1998 Acura 2.5TLFACTORY OEM SERVICE PROCEDURE

Service Intervals & Specifications

WARNING: This page is about a different car, the 1996 Acura 2.5TL. However, it is still accessible from the selected car via links, so may be relevant.
REPLACEMENT INTERVALS

Component Miles
Air Filter 30,000
Anti-Lock Brake System High Pressure Hose 60,000
Automatic Transmission Fluid 90,000
Brake Fluid 30,000
Camshaft Timing Belt 90,000
Coolant (1)
Differential 30,000
Engine Oil 7500
Engine Oil Filter 15,000
Fuel Filter 60,000
Manual Transmission Oil 90,000
Spark Plugs 30,000
Valve Clearance N/A
(1) First service interval is 45,000 miles. Service every 30,000 miles thereafter.
BELT ADJUSTMENT

Application (1) Deflection - In. (mm)
A/C Compressor 11/32-7/16 (9.0-11.0)
Alternator 11/32-29/64 (9.0-11.5)
Power Steering 11/32-13/32 (9.0-10.0)
(1) Deflection is with 22 lbs. (10 kg) pressure applied midway on longest belt run.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.