1998 Acura 2.3CL AutomaticFACTORY OEM SERVICE PROCEDURE

Ignition Key Switch

When ignition key is left in the ignition switch, key-in beeper in the ICU receives ground through the ignition key switch. When driver's door is opened, the key-in beeper in the ICU is grounded through the door switch, and the beeper sounds.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.