1997 Acura 2.2CL AutomaticFACTORY OEM SERVICE PROCEDURE

Wheel Alignment Specifications

WHEEL ALIGNMENT SPECIFICATIONS

Application Preferred Range
Integra
Camber (1)
Front - .17 - 1.17 To .83
Rear - .75 - 2.0 To 0
Caster (1)
Front 1.17 .17 To 2.17
Toe-In (1)
Front 0 - .16 To .16
Rear .16 .08 To .32
Toe-In (2)
Front 0 (0) - .08 To .08 (- 2 To 2)
Rear .08 (2) .04 To .16 (1 To 4)
Toe-Out On Turns (1)
Inner 36 N/A
Outer 30.5 N/A
2.2CL & 3.0CL
Camber (1)
Front - .12 - 1.12 To .88
Rear - 1.20 - 1.70 To - .70
Caster (1)
Front 3.35 2.35 To 4.35
Toe-In (1)
Front - .00 - .16 To .16
Rear .16 0 To .32
Toe-In (2)
Front - 0 (0) - .08 To .08 (- 2 To 2)
Rear .08 (2) 0 To .16 (0 To 4)
Toe-Out On Turns (1)
Inner 34.5 N/A
Outer 27.5 N/A
2.5TL
Camber (1)
Front 0 - 1 To 1
Rear - .5 - 1.5 To .5
Caster (1)
Front 2.12 1.12 To 3.12
Toe-In (1)
1997 Models
Front - .07 - .23 To .10
Rear .16 0 To .32
1998 Models
Front - .07 - .23 To .07
Rear .16 0 To .32
Toe-In (2)
1997 Models
Front - .03 (- 1) - .11 To .05 (- 3 To 1)
Rear .08 (2) 0 To .16 (0 To 4)
1998 Models
Front - .03 (- 1) - .12 To .03 (- 3 To 1)
Rear .08 (2) 0 To .16 (0 To 4)
Toe-Out On Turns (1)
1997 Models
Inner 40.0 N/A
Outer 38.3 N/A
1998 Models
Inner 40.0 N/A
Outer 33.3 N/A
3.0CL
Camber (1)
Front .02 - .98 To 1.02
Rear - .50 - 1.00 To 0
Caster (1)
Front 3.30 2.30 To 4.30
Toe-In (1)
Front 0 - .16 To .16
Rear .16 0 To .32
Toe-In (2)
Front 0 (0) - .08 To .08 (- 2 To 2)
Rear .08 (2) 0 To .16 (0 To 4)
Toe-Out On Turns (1)
Inner 34.5 N/A
Outer 27.5 N/A
3.2TL
Camber (1)
Front 0 - 1 To 1
Rear - .5 - 1.5 To .5
Caster (1)
Front 3.67 2.67 To 4.67
Toe-In (1)
Front - .08 - .24 To .08
Rear .24 .08 To .40
Toe-In (2)
Front - .04 (- 1) - .12 To .04 (- 3 To 1)
Rear .12 (3) .04 To .20 (1 To 5)
Toe-Out On Turns (1)
Inner 47.5 N/A
Outer 34.5 N/A
3.5RL
Camber (1)
Front 0 - 1 To 1
Rear - .5 - 1.5 To .5
Caster (1)
Front 2.83 1.83 To 3.83
Toe-In (1)
Front 0 - .16 To .16
Rear .16 0 To .32
Toe-In (2)
Front 0 (0) - .08 To .08 (- 2 To 2)
Rear .08 (2) 0 To .16 (0 To 4)
Toe-Out On Turns (1)
Inner 41.5 N/A
Outer 33.9 N/A
(1) Measurements are in degrees.
(2) Measurements are in inches (mm).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.