1996 Acura SLXFACTORY OEM SERVICE PROCEDURE

Fuel Pump Pressure Test

NOTE: Begin basic fuel system diagnosis with testing fuel pressure.
  1. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASEΒ  . Attach Fuel Pressure Gauge Set (J-34730-1 ) and Adapter (J-35957-1 ) to Schrader fitting on fuel rail. Disconnect pressure regulator vacuum hose. Turn ignition on. Allow fuel pump to run for about 2 seconds. Check fuel pressure. See FUEL PUMP PERFORMANCEΒ  table.
  2. With engine at normal operating temperature, turn ignition on and let fuel pressure build to maximum pressure. Start engine and observe pressure. See FUEL PUMP PERFORMANCEΒ  . If pressure drop is as specified, system is operating properly.
FUEL PUMP PERFORMANCE

Application Specification
Operating Pressure 42-55 psi (3.0-3.9 kg/cm2 )
Pressure Drop 3-15 psi (0.2-1.1 kg/cm2 )
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.