Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1996 Acura Integra GS-R, 2D CoupeFACTORY OEM SERVICE PROCEDURE
Automatic Transmissions DTCS
AUTOMATIC TRANSMISSIONS DTCS
| DTC | OEM Code | Description |
|---|---|---|
| P0715 | 15 | MAINSHAFT SPEED SENSOR |
| P0720 | 9 | COUNTERSHAFT SPEED SENSOR |
| P0725 | 11 | IGNITION COIL |
| P0730 | SHIFT CONTROL SYSTEM | |
| P0740 | LOCK-UP CONTROL SYSTEM | |
| P0753 | 7 | SHIFT CONTROL SOLENOID VALVE "A" |
| P0758 | 8 | SHIFT CONTROL SOLENOID VALVE "B" |
| P1705 | 5 | A/T GEAR POSITION SWITCH (SHORT) |
| P1706 | 6 | A/T GEAR POSITION SWITCH (OPEN) |
| P1753 | 1 | LOCK-UP CONTROL SOLENOID VALVE "A" |
| P1758 | 2 | LOCK-UP CONTROL SOLENOID VALVE "B" |
| P1786 | 14 | FAS SIGNAL |
| P1790 | 3 | THROTTLE POSITION (TP) SENSOR |
| P1791 | 4 | VEHICLE SPEED SENSOR (VSS) |
| P1792 | 10 | ENGINE COOLANT TEMPERATURE (ECT) SENSOR |
| P1794 | 13 | BAROMETRIC PRESSURE (BARO) SENSOR |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.