Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1996 Acura 3.2TLFACTORY OEM SERVICE PROCEDURE
Automatic Transmission DTCS
AUTOMATIC TRANSMISSION DTCS
| DTC | OEM Code | Description |
|---|---|---|
| P0715 | 15 | Defective Mainshaft Speed Sensor |
| P0720 | 9 | Defective Countershaft Speed Sensor |
| P0730 | 41 | Defective Shift Control System |
| P0740 | 40 | Defective Lock-Up Control System |
| P0753 | 7 | Defective Shift Control Solenoid "A" |
| P0758 | 8 | Defective Shift Control Solenoid "B" |
| P1705 | 5 | Defective A/T Gear Position Switch |
| P1706 | 6 | Defective A/T Gear Position Switch |
| P1753 | 1 | Defective Lock-Up |
| P1758 | 2 | Defective Lock-Up Control Solenoid "B" |
| P1768 | 16 | Defective Linear Solenoid |
| P1791 | 4 | Defective Vehicle Speed Sensor |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
