Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Driving Position Memory System: Notes
Vehicles are equipped with Driving Position Memory System (DPMS). The power driver's seat and steering column, whose positions determine the driver's position, have a memory feature. The three seat adjustments (back and forth, up and down, seat back angle) and the two steering column adjustments (extend and retract, and steering column angle) can be regulated separately. All five adjustments can be memorized by pressing the MEMO button on the driving position memory switch, and then (within five seconds) pressing one of the two position buttons. Pressing the appropriate position button will move the seat and the steering column to the position memorized for driver 1 or driver 2, eliminating manual seat and steering column adjustment when changing drivers. Disconnecting the battery for more than 30 seconds will cancel the memorized positions.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
