Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Acura Legend GS, AutomaticFACTORY OEM SERVICE PROCEDURE
Engine Performance DTCS
ENGINE PERFORMANCE DTCS
| OEM Code | Description |
|---|---|
| 1 | HEATED OXYGEN SENSOR (HO2S) |
| 2 | HEATED OXYGEN SENSOR (HO2S) |
| 3 | MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR |
| 4 | CRANK/CYL SENSOR |
| 5 | MANIFOLD PRESSURE (MAP) SENSOR |
| 6 | ENGINE COOLANT TEMPERATURE (ECT) SENSOR |
| 7 | THROTTLE POSITION (TP) SENSOR |
| 9 | CRANK/CYL SENSOR |
| 10 | INTAKE AIR TEMPERATURE (IAT) SENSOR |
| 12 | EGR SYSTEM |
| 13 | BAROMETRIC PRESSURE (BARO) SENSOR |
| 14 | IDLE AIR CONTROL VALVE (IACV) |
| 15 | IGNITION OUTPUT SIGNAL |
| 16 | FUEL INJECTOR CIRCUIT |
| 17 | VEHICLE SPEED SENSOR (VSS) |
| 18 | IGNITION TIMING ADJUSTER |
| 23 | KNOCK SENSOR (KS) |
| 41 | HEATED OXYGEN SENSOR (HO2S) HEATER |
| 42 | HEATED OXYGEN SENSOR (HO2S) HEATER |
| 43 | FUEL SUPPLY SYSTEM |
| 44 | FUEL SUPPLY SYSTEM |
| 45 | FUEL METERING SYSTEM |
| 46 | FUEL METERING SYSTEM |
| 53 | KNOCK SENSOR (KS) |
| 54 | CRANK/CYL SENSOR |
| 59 | CRANK/CYL SENSOR |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
