1995 Acura Legend GS, AutomaticFACTORY OEM SERVICE PROCEDURE

Component Locations

COMPONENT LOCATIONS

Component Location
Engine Compartment Fuse/Relay Block On Left Inner Fender Panel, Behind Battery. See Fig 1 .
Engine Oil Pressure Switch At Base Of Oil Filter, To Right Of Crankshaft Pulley.
Passenger Compartment Fuse/Relay Block Behind Left Kick Panel. See Fig 2 & Fig 3 .
Underhood Relay Box "A" On Left Top Radiator Support, Near Battery. See Fig 1 .
Underhood Relay Box "B" On Right Rear Of Engine Compartment, Near Strut Tower. See Fig 1 .
Integrated Control Unit Mounted Behind Passenger Compartment Fuse/Relay Block. See Fig 3 .
Lights-On Chime Module Behind Left Side Of Steering Column, On Steering Column Crossbar Support
Seat Belt Switch In Driver's Seat Belt Buckle
G152 Left Front Of Engine Compartment. See Fig 4 .
G153 Right Front Corner Of Engine Compartment. See Fig 5 .
G301 Left Kick Panel. See Fig 6 .
G302 Right Rear Corner Of Engine Compartment. See Fig 7 .
G303 Right Kick Panel. See Fig 8 .
Fig 1: Component Locations (1 Of 8)
G95D24011
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.