Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Acura Integra GS-R, 4D SedanFACTORY OEM SERVICE PROCEDURE
Automatic Transmission DTC
AUTOMATIC TRANSMISSION DTC
| OEM Code | Description |
|---|---|
| 1 | Defective Lock-Up Control Solenoid "A" |
| 2 | Defective Lock-Up Control Solenoid "B" |
| 3 | Defective Throttle Position (TP) Sensor |
| 4 | Defective Vehicle Speed Sensor (VSS) |
| 5 | Defective A/T Gear Position Switch |
| 6 | Defective A/T Gear Position Switch |
| 7 | Defective Shift Control Solenoid "A" |
| 8 | Defective Shift Control Solenoid "B" |
| 9 | Defective Countershaft Speed Sensor |
| 10 | Defective Engine Coolant Temp Sensor |
| 11 | Defective Ignition Coil |
| 13 | Defective Barometric Sensor |
| 14 | Shorted Or Open Wire Between TCM Terminal D16 & ECM, Faulty ECM |
| 15 | Defective Mainshaft Speed Sensor |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.