Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA1994INTEGRA (GS-R) L4-1797CC 1.8L DOHC (VTEC)REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCONTROL ASSEMBLYSERVICE AND REPAIROVERHAUL
1994 Acura Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC)
Overhaul
1994 Acura Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC)SECTION Overhaul
Overhaul
Air Mix Control Cable Replacement
1. Remove the air mix control cable.
2. Hook the tip of the new air mix control cable to the temperature control lever, and push the cable housing unt is locked.
NOTE: After assembly, check that the temperature control lever slides smoothly through the full stroke from right to left.
Air Mix Control Cable Replacement
1. Remove the air mix control cable.
2. Hook the tip of the new air mix control cable to the temperature control lever, and push the cable housing unt is locked.
NOTE: After assembly, check that the temperature control lever slides smoothly through the full stroke from right to left.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.