1993 Acura Integra GS-RFACTORY OEM SERVICE PROCEDURE

Drivetrain Vibration On Acceleration (HON0006AP)

Publication date: 1970-01-01
Reference number: HON0006AP

DRIVETRAIN VIBRATION ON ACCELERATION

DRIVETRAIN VIBRATION ON ACCELERATION

TECHNICAL INFORMATION TIP

Reference Number(s): HON0006AP, Date of Issue: 

DRIVETRAIN VIBRATION ON ACCELERATION

YEAR(S): Mid 1980's and Up

MANUFACTURER: Acura & Honda

MODEL(S): All Honda Accord & Acura Integra

ISSUE & TIP

Some Honda Accord and Acura Integra models from the mid-80s and later may have a vibration on acceleration that can be felt through the body.

This vibration is more noticeable during hard acceleration and can also be felt through the floor or seat.

We have found the cause of this vibration to be worn inner CV joints. Remove and replace the drive axle or inner CV joint to cure this problem.

Courtesy of Import Service Magazine

with thanks to:

Rick Neyman

Rick's Japanese Connection

Moorpark, California

REFERENCE NUMBER

HON0006AP

NOTE: This information has been obtained from sources generally believed to be reliable. Use your own judgment before relying on this data. Neither the suppliers of these Technical Information Tips, nor lemon-25 Repair Information Company, LLC, guarantees or assumes responsibility for data accuracy or completeness, nor is liability assumed by the suppliers of these Technical Information Tips or lemon-25 Repair Information Company, LLC, for any claims or damages resulting from the use of this information.
Chapter Navigation
Previous ProcedureDrivetrain Vibration On Acceleration (HON0006AP)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.