Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1993 Acura Integra GS-RFACTORY OEM SERVICE PROCEDURE
Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A/C Compressor Bracket Bolts | 17 (23) | |||||||||||||
| Alternator Belt Adjustment Bolt | 17 (23) | |||||||||||||
| Alternator Mount Bolt | 33 (45) | |||||||||||||
| Camshaft Sprocket Bolts | 27 (37) | |||||||||||||
| Connecting Rod Nuts | (1) 24 (32) | |||||||||||||
| Crankshaft Pulley Bolt | 133 (180) | |||||||||||||
| Cylinder Head Bolts | (2) 63 (85) | |||||||||||||
| Distributor Mount Bolts | 16 (22) | |||||||||||||
| Engine Block-To-Transaxle | ||||||||||||||
| Housing Bolts | 47 (64) | |||||||||||||
| Engine Mount Bolts | (3) | |||||||||||||
| Exhaust Manifold Nuts | 23 (31) | |||||||||||||
| Exhaust Pipe Flange Nuts | 40 (54) | |||||||||||||
| Flexplate (A/T) | 55 (75) | |||||||||||||
| Flywheel Bolts (M/T) | (4) 77 (105) | |||||||||||||
| Intake Manifold Nuts | 17 (23) | |||||||||||||
| Main Bearing Cap Bolts | (5) 58 (78) | |||||||||||||
| Oil Pump Bolts | ||||||||||||||
| 6-mm Bolts | (6) | |||||||||||||
| 8-mm Bolts | 17 (23) | |||||||||||||
| Power Steering Mount Bolt | 17 (23) | |||||||||||||
| Rocker Arm Lock Nuts | 18 (24) | |||||||||||||
| Rocker Arm Pivot Bolt | 46 (62) | |||||||||||||
| Shift Lever Torque Rod Bolt | 16 (22) | |||||||||||||
| Timing Belt Tension Adjuster Bolt | 40 (54) | |||||||||||||
| INCH Lbs. (N.m) | ||||||||||||||
| Camshaft Bearing Bolt | 88 (10) | |||||||||||||
| Crankshaft Rear Seal Cover Bolts | 98 (11) | |||||||||||||
| Fuel Service Bolt | 106 (12) | |||||||||||||
| Oil Pan Bolts | 106 (12) | |||||||||||||
| Oil Pump Screen Nuts | 98 (11) | |||||||||||||
| Timing Belt Cover Bolts | 106 (12) | |||||||||||||
| Valve Cover Nuts | 88 (10) | |||||||||||||
| Water Pump Bolt | 106 (12) | |||||||||||||
|
||||||||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.