Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fluids
Quick Lookups: Fluids — 1992 Acura Integra LS, 2D Hatchback, Automatic Service Manual : Fluids FLUID CAPACITIES Fluid Type Application Standard Metric Fluid Spec Note S/H Air Cond Refrigerant 2.05 LBS. 0.92 KG R-12 S Automatic Transmission Fluid Drain and Refill 3.20 QTS. 3.02 L Automatic Transmission Fluid DEXRON II S Automatic Transmission Fluid Total Capacity 6.70 QTS. 6.34 L Automatic Transmission Fluid DEXRON II S Brake Fluid N/A N/A DOT 3 Brake Fluid Use DOT 4 as a temporary replacement. S Engine Coolant Automatic Trans Drain and Refill 1.29 GALS. 4.88 L 50/50 mixture of HONDA Antifreeze/Coolant and water S Engine Coolant Automatic Trans Total Capacity 1.53 GALS. 5.79 L 50/50 mixture of HONDA Antifreeze/Coolant and water S Engine Oil Drain and Refill,w/Filter 4.00 QTS. 3.78 L API - SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30 (20Deg.F to Above 100Deg.F) S Engine Oil Drain and Refill,w/o Filter 3.70 QTS. 3.5 L API - SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30 (20Deg.F to Above 100Deg.F) S Engine Oil Total Capacity 4.90 QTS. 4.63 L API - SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30 (20Deg.F to Above 100Deg.F) S Fuel Tank 13.20 GALS. 49.96 L S Manual Transmission Fluid Drain and Refill 2.40 QTS. 2.27 L API - SAE 10W-30, 10W-40 (Below -20Deg.F to Above 100Deg.F), 20W-40 (0Deg.F to Above 100Deg.F), 30 (20Deg.F to Above 100Deg.F), Grade SE or SF S Manual Transmission Fluid Total Capacity 2.50 QTS. 2.36 L API - SAE 10W-30, 10W-40 (Below -20Deg.F to Above 100Deg.F), 20W-40 (0Deg.F to Above 100Deg.F), 30 (20Deg.F to Above 100Deg.F), Grade SE or SF S Power Steering Fluid N/A N/A Genuine HONDA Power Steering Fluid DO NOT use Automatic Transmission Fluid. S Windshield Washer Fluid 2.60 QTS. 2.46 L Use commercially-available windshield washer fluid only. S
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.