1992 Acura Integra GS-RFACTORY OEM SERVICE PROCEDURE

Fuel Rails & Injectors: Removal

  1. Relieve fuel pressure. See FUEL SYSTEM PRESSURE RELEASEΒ . On Legend and Vigor, remove engine harness cover(s). On Legend, See Fig 1. On all models, unplug injector electrical connectors. Place a rag over pressure regulator fuel return hose.
  2. Disconnect vacuum hose and fuel return hose from pressure regulator. Disconnect fuel line from fuel rail. Remove fuel rail retaining nuts and fuel rail. Remove injectors from intake manifold.
    Fig 1: Exploded View Of Fuel Rail Assembly (Legend)
    G91J16294Courtesy of AMERICAN HONDA MOTOR CO., INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.