Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2024 Toyota SequoiaOil Type & Capacity
OEM spec from the factory service manual for the Capstone, 4WD variant.
Quick Answer
Oil Type
$TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-6A Multigrade Engine Oil
Capacity (w/ Filter)
7.70 QTS.
7.28 L
Variant
Capstone, 4WD
Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change.
The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.
This vehicle's factory manual
The oil spec is above. This opens the fluids section of the 2024 Toyota Sequoia Capstone, 4WD factory book.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2024 Toyota Sequoia
Frequently Asked Questions
- What type of oil does a 2024 Toyota Sequoia take?
- The 2024 Toyota Sequoia requires TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-6A Multigrade Engine Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Capstone, 4WD configuration.
- How much oil does a 2024 Toyota Sequoia need?
- The 2024 Toyota Sequoia takes 7.70 QTS. (7.28 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2024 Toyota Sequoia?
- Yes — synthetic oil that meets the TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-6A Multigrade Engine Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2024 Toyota Sequoia?
- Using oil that does not meet the TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-6A Multigrade Engine Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.