Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2023 Toyota CrownOil Type & Capacity
OEM spec from the factory service manual for the Limited variant.
Quick Answer
Oil Type
$TOYOTA Genuine Motor Oil. JASO GLV-1 SAE 0W-8
Capacity (w/ Filter)
4.50 QTS.
4.25 L
Variant
Limited
Note: If SAE 0W-8 is not available, SAE 0W-16 oil may be used. However, it must be replaced with SAE 0W-8 at the next oil change.
The engine oil capacity is a reference quantity to be used when changing the engine oil. When actually adding the engine oil, make sure that the oil level is between the low level mark and refill upper limit mark Warm up the engine and turn off the hybrid system, wait about 5 minutes, and check the oil level on the dipstick.
This vehicle's factory manual
The oil spec is above. This opens the fluids section of the 2023 Toyota Crown Limited factory book.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2023 Toyota Crown
Frequently Asked Questions
- What type of oil does a 2023 Toyota Crown take?
- The 2023 Toyota Crown requires TOYOTA Genuine Motor Oil. JASO GLV-1 SAE 0W-8. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Limited configuration.
- How much oil does a 2023 Toyota Crown need?
- The 2023 Toyota Crown takes 4.50 QTS. (4.25 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2023 Toyota Crown?
- Yes — synthetic oil that meets the TOYOTA Genuine Motor Oil. JASO GLV-1 SAE 0W-8 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2023 Toyota Crown?
- Using oil that does not meet the TOYOTA Genuine Motor Oil. JASO GLV-1 SAE 0W-8 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.