2023 Chevrolet Silverado 3500 Hd Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2023 (2023).

Quick Answer

Air Cond Compressor Oil

3.40 OZS. (0.1 L) β€” PAG Oil (R-134a)

Automatic Transmission Fluid (Trans Mfr CD 10L1000/MGM)

20.60 QTS. (19.49 L) β€” Automatic Transmission Fluid DEXRON ULV Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

Brake Fluid

β€” DOT 4 Hydraulic Brake Fluid

Differential Gear Oil

3.17 QTS. (2.99 L) β€” SAE 75W-90 Synthetic Axle Lubricant Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

Engine Coolant (Diesel)

2.00 QTS. (1.89 L) β€” 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

Engine Oil (Diesel)

9.20 QTS. (8.7 L) β€” API - SAE 15W-40 Note: Oils designated as API CJ-4 or CK-4 are required for the vehicle. The CJ-4 or CK-4 designation can appear either alone or in combination with other American Petroleum Institute (API) designations, such as API CJ-4/SL. These letters show API levels of quality. When it is very cold, below 0Deg. F (-18Deg.C), you should use SAE 5W-40 to improve cold starting. Do not use other viscosity such as SAE 10W-30, SAE 10W-40, or SAE 20W-50.

Power Steering Fluid (Diesel)

1.20 QTS. (1.13 L) β€” GM Power Steering Fluid Note: GM Part No. 89021184. Approximate capacity.

Transfer Case Fluid (T/Case Mfr CD 3023-4/NQH)

1.60 QTS. (1.51 L) β€” Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

Automatic Transmission Fluid (Trans Mfr CD 10L1000/MGU)

20.60 QTS. (19.49 L) β€” Automatic Transmission Fluid DEXRON ULV Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

Automatic Transmission Fluid (Trans Mfr CD 6L90-E/MYD)

10.50 QTS. (9.93 L) β€” Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

Engine Coolant (Gas)

15.50 QTS. (14.66 L) β€” 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

Engine Oil (Gas)

7.50 QTS. (7.09 L) β€” API - SAE 5W-30 Dexos Note: Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.

Power Steering Fluid (Gas)

1.40 QTS. (1.32 L) β€” GM Power Steering Fluid Note: GM Part No. 89021184. Approximate capacity.

Notes

  • β†’All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • β†’Approximate capacity. Diesel Exhaust Fluid or diesel exhaust fluid that meets ISO 22241-1 or displays the API Diesel Exhaust Fluid Certification Mark.
  • β†’Oils designated as API CJ-4 or CK-4 are required for the vehicle. The CJ-4 or CK-4 designation can appear either alone or in combination with other American Petroleum Institute (API) designations, such as API CJ-4/SL. These letters show API levels of quality. When it is very cold, below 0Deg. F (-18Deg.C), you should use SAE 5W-40 to improve cold starting. Do not use other viscosity such as SAE 10W-30, SAE 10W-40, or SAE 20W-50.
  • β†’GM Part No. 89021184. Approximate capacity.
  • β†’Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
  • β†’Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
Source: Factory service manual β€” 2023 Chevrolet Silverado 3500 Hd 2023.

This vehicle's factory manual

2023 Chevrolet Silverado 3500 Hd: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Related for Your 2023 Chevrolet Silverado 3500 Hd

Frequently Asked Questions

What are the fluid capacities for a 2023 Chevrolet Silverado 3500 Hd?
The 2023 Chevrolet Silverado 3500 Hd fluid capacities are: Air Cond Compressor Oil: 3.40 OZS. (0.1 L) β€” PAG Oil (R-134a), Automatic Transmission Fluid (Trans Mfr CD 10L1000/MGM): 20.60 QTS. (19.49 L) β€” Automatic Transmission Fluid DEXRON ULV Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Brake Fluid: β€” DOT 4 Hydraulic Brake Fluid, Differential Gear Oil: 3.17 QTS. (2.99 L) β€” SAE 75W-90 Synthetic Axle Lubricant Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Engine Coolant (Diesel): 2.00 QTS. (1.89 L) β€” 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Engine Oil (Diesel): 9.20 QTS. (8.7 L) β€” API - SAE 15W-40 Note: Oils designated as API CJ-4 or CK-4 are required for the vehicle. The CJ-4 or CK-4 designation can appear either alone or in combination with other American Petroleum Institute (API) designations, such as API CJ-4/SL. These letters show API levels of quality. When it is very cold, below 0Deg. F (-18Deg.C), you should use SAE 5W-40 to improve cold starting. Do not use other viscosity such as SAE 10W-30, SAE 10W-40, or SAE 20W-50., Power Steering Fluid (Diesel): 1.20 QTS. (1.13 L) β€” GM Power Steering Fluid Note: GM Part No. 89021184. Approximate capacity., Transfer Case Fluid (T/Case Mfr CD 3023-4/NQH): 1.60 QTS. (1.51 L) β€” Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Automatic Transmission Fluid (Trans Mfr CD 10L1000/MGU): 20.60 QTS. (19.49 L) β€” Automatic Transmission Fluid DEXRON ULV Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Automatic Transmission Fluid (Trans Mfr CD 6L90-E/MYD): 10.50 QTS. (9.93 L) β€” Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Engine Coolant (Gas): 15.50 QTS. (14.66 L) β€” 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Engine Oil (Gas): 7.50 QTS. (7.09 L) β€” API - SAE 5W-30 Dexos Note: Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos., Power Steering Fluid (Gas): 1.40 QTS. (1.32 L) β€” GM Power Steering Fluid Note: GM Part No. 89021184. Approximate capacity..
How much engine oil does a 2023 Chevrolet Silverado 3500 Hd take?
Engine oil capacity depends on the engine and whether the filter is changed. Check the applicable manual for your exact vehicle and service procedure before filling.