2022 Chevrolet TraverseOil Type & Capacity

OEM spec from the factory service manual for the High Country, 4WD variant.

Quick Answer

Oil Type

$API - SAE 5W-30

Capacity (w/ Filter)

6.00 QTS.

5.67 L

Variant

High Country, 4WD

Note: ACDelco dexos1 gen 3 full synthetic engine oil. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.

This vehicle's factory manual

The oil spec is above. This opens the fluids section of the 2022 Chevrolet Traverse High Country, 4WD factory book.

Open the 2022 Chevrolet manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Related for Your 2022 Chevrolet Traverse

Frequently Asked Questions

What type of oil does a 2022 Chevrolet Traverse take?
The 2022 Chevrolet Traverse requires API - SAE 5W-30. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the High Country, 4WD configuration.
How much oil does a 2022 Chevrolet Traverse need?
The 2022 Chevrolet Traverse takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2022 Chevrolet Traverse?
Yes β€” synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2022 Chevrolet Traverse?
Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.