Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2022 Bmw 230i Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2022-2024 (2022-2024).

Quick Answer

Automatic Transmission Fluid

9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3

Brake Fluid

— BMW Brake Fluid DOT 4 with low viscosity

Engine Coolant

8.56 QTS. (8.1 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).

Engine Oil

5.60 QTS. (5.29 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-12, LL22FE++

Notes

→The nameplate in the engine compartment indicates which refrigerant has been used.
→Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
→Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.

Source: Factory service manual — 2022 Bmw 230i 2022-2024.

Other specs:All specs Oil Type Coolant Tire Size Belt Spark Plugs Trans Fluid Brake Fluid

This vehicle's factory manual

The spec is above. This opens the 2022 Bmw factory books so you can go into the 230i procedure.

Open the 2022 Bmw manual

What You'll Need

Tools

Fluid Funnel Set

Search Amazon →

Tool

Large Capacity Drain Pan

Search Amazon →

Related for Your 2022 Bmw 230i

Maintenance Specs

🛢️Oil Type & Capacity ❄️Coolant Type 🔘Tire Size ⚡Spark Plug Type ⚙️Transmission Fluid ⚙️Serpentine Belt 🚨Brake Fluid

Quick Actions

🏠2022 Bmw 230i Hub 🛠️All Repair Guides 🤖AI Diagnosis

Frequently Asked Questions

What are the fluid capacities for a 2022 Bmw 230i?: The 2022 Bmw 230i fluid capacities are: Automatic Transmission Fluid: 9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3, Brake Fluid: — BMW Brake Fluid DOT 4 with low viscosity, Engine Coolant: 8.56 QTS. (8.1 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)., Engine Oil: 5.60 QTS. (5.29 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-12, LL22FE++.
How much engine oil does a 2022 Bmw 230i take?: The 2022 Bmw 230i takes 5.60 QTS. (5.29 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-12, LL22FE++.