Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Toyota 4RunnerOil Type & Capacity
OEM spec from the factory service manual for the Limited, AWD variant.
Quick Answer
Oil Type
TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade engine oil
Capacity (w/ Filter)
6.60 QTS.
6.24 L
Variant
Limited, AWD
Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change.
Source: Factory service manual — 2021 Toyota 4Runner Limited, AWD. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2021 Toyota 4Runner take?
- The 2021 Toyota 4Runner requires TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade engine oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Limited, AWD configuration.
- How much oil does a 2021 Toyota 4Runner need?
- The 2021 Toyota 4Runner takes 6.60 QTS. (6.24 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2021 Toyota 4Runner?
- Yes — synthetic oil that meets the TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade engine oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2021 Toyota 4Runner?
- Using oil that does not meet the TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade engine oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.