2021 Mazda 3Coolant Type & Capacity

OEM spec from the factory service manual for the Preferred, 4D Sedan, 2.5L Eng VIN L, AWD variant.

Quick Answer

Coolant Type

See manual

Capacity

7.00 QTS.

6.62 L

Variant

Preferred, 4D Sedan, 2.5L Eng VIN L, AWD

Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

This vehicle's factory manual

The coolant spec is above. This opens the fluids section of the 2021 Mazda 3 Preferred, 4D Sedan, 2.5L Eng VIN L, AWD factory book.

Open the 2021 Mazda manual
Other specs:All specs

Related for Your 2021 Mazda 3

Frequently Asked Questions

What type of coolant does a 2021 Mazda 3 take?
The 2021 Mazda 3 uses an OEM-specified coolant. Refer to the factory service manual for the exact type, as it varies by engine variant.
How much coolant does a 2021 Mazda 3 hold?
The 2021 Mazda 3 cooling system capacity is 7.00 QTS. (6.62 L).
Can I use universal coolant in my 2021 Mazda 3?
Always use coolant that meets the OEM specification for your engine. Universal coolants may not provide adequate corrosion protection.
What happens if I use the wrong coolant in my 2021 Mazda 3?
Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.