Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Hyundai Santa FeOil Type & Capacity
OEM spec from the factory service manual for the Calligraphy, AWD variant.
Quick Answer
Oil Type
$API - SN PLUS/SP or ILSAC GF-6, SAE 0W-30
Capacity (w/ Filter)
6.13 QTS.
5.8 L
Variant
Calligraphy, AWD
Note: Requires: API SN PLUS (or above) or ACEA A5/B5 Full synthetic grade engine oil. If lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and oil filter must be replaced.
This vehicle's factory manual
The oil spec is above. This opens the fluids section of the 2021 Hyundai Santa Fe Calligraphy, AWD factory book.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2021 Hyundai Santa Fe
Frequently Asked Questions
- What type of oil does a 2021 Hyundai Santa Fe take?
- The 2021 Hyundai Santa Fe requires API - SN PLUS/SP or ILSAC GF-6, SAE 0W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Calligraphy, AWD configuration.
- How much oil does a 2021 Hyundai Santa Fe need?
- The 2021 Hyundai Santa Fe takes 6.13 QTS. (5.8 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2021 Hyundai Santa Fe?
- Yes — synthetic oil that meets the API - SN PLUS/SP or ILSAC GF-6, SAE 0W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2021 Hyundai Santa Fe?
- Using oil that does not meet the API - SN PLUS/SP or ILSAC GF-6, SAE 0W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.