Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 GMC CanyonOil Type & Capacity
OEM spec from the factory service manual for the AT4, 2.8L Eng VIN 1 variant.
Quick Answer
Oil Type
API - SAE 5W-30
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
AT4, 2.8L Eng VIN 1
Note: Use engine oils that have been approved by GM as meeting the dexos2 specification are marked with the dexos2 approved logo. In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade.
Source: Factory service manual — 2021 GMC Canyon AT4, 2.8L Eng VIN 1. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2021 GMC Canyon take?
- The 2021 GMC Canyon requires API - SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the AT4, 2.8L Eng VIN 1 configuration.
- How much oil does a 2021 GMC Canyon need?
- The 2021 GMC Canyon takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2021 GMC Canyon?
- Yes — synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2021 GMC Canyon?
- Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.