Chevrolet Traverse serpentine belt routing
There is no one Traverse belt route or tensioner direction for every year and engine. Chevrolet's 2018 owner guide shows separate 2.0L and 3.6L routing figures. In the checked service examples, the 3.6L tensioner turns clockwise, while the redesigned 2024 Traverse 2.5L procedure says counterclockwise. Match the exact model and engine before releasing tension or ordering a belt.
2024 Traverse and Traverse Limited use different procedures
The checked 2024 Traverse LT FWD 2.5L LK0 calls its belt the accessory drive primary belt. Its removal and installation leaves say to turn the tensioner counterclockwise, and show air-cleaner access and a final check that the belt is centered on every pulley. The checked 2024 Traverse Limited LT FWD 3.6L LFY has a separate drive-belt procedure that says clockwise. Do not use the Limited diagram or direction on the redesigned 2.5L vehicle.
Checked belt-routing and replacement sources
Each link opens the service leaf for the labeled year and archive variant. The 2018 Chevrolet owner guide also publishes distinct 2.0L and 3.6L routing drawings under Engine Drive Belt Routing. These examples do not establish the belt part number or fit for another VIN.
2015 Chevrolet Traverse LS, FWD
3.6L LLT
The checked procedure shows its own routing figure, starts with front wheelhouse liner access, and turns the tensioner clockwise to release the belt.
Open 2015 3.6L replacement procedure2018 Chevrolet Traverse RS
2.0L LTG
This checked RS procedure has a 2.0L routing figure and right front wheelhouse liner access. Its short belt instruction does not state a tensioner turn direction.
Open 2018 2.0L replacement procedure2018 Chevrolet Traverse LT, FWD
3.6L LFY
The 3.6L procedure has a different routing figure and turns the tensioner clockwise after front wheelhouse liner access.
Open 2018 3.6L replacement procedure2023 Chevrolet Traverse LT, FWD
3.6L LFY
The checked 2023 replacement leaf shows its routing figure and directs clockwise tensioner rotation.
Open 2023 3.6L replacement procedure2024 Chevrolet Traverse Limited LT, FWD
3.6L LFY
Traverse Limited keeps a separate 3.6L service branch. The checked replacement leaf turns the tensioner clockwise.
Open 2024 Limited 3.6L procedureBefore selecting a replacement belt
Confirm the year, whether the vehicle is a Traverse or Traverse Limited, engine code and accessory equipment. Use the exact routing figure and service leaf. A noisy belt can also point to a tensioner, idler or accessory fault; inspect and diagnose those parts before replacing them. The checked leaves do not supply a universal belt length, rib count or mandatory replacement interval.
Compare belts for the checked 2018 RS 2.0L example
This is a search for the 2018 Traverse RS 2.0L LTG, whose separate routing and replacement leaf is linked above. Search results are not verified parts. Confirm the VIN, equipment, belt listing and route before buying; do not use this search for the 3.6L or 2024 models.
Search 2018 RS 2.0L beltsAs an Amazon Associate, AllOEMManuals earns from qualifying purchases.
This vehicle's factory manual
Chevrolet Traverse: choose your year, then confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.