BMW 330i Coolant Type
Factory manual coolant type & capacity for the BMW 330i. Exact capacities and specs extracted from the LEMON service manual archive.
Last updated: 2026-10-31 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2019-2024 BMW 330i coolant: 4.45 QTS. (4.21 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)..
| Generation | Years | Top spec |
|---|---|---|
| 2019-2024 | 2019-2024 | 4.45 QTS. (4.21 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts). |
| 2017-2018 | 2017-2018 | 8.56 QTS. (8.1 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts). |
This vehicle's factory manual
BMW 330i: choose your year, then confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Know the exact coolant type job for your BMW 330i
2019-2024 BMW 330i coolant: 4.45 QTS. (4.21 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)..
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.
2019-2024
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
2017-2018
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
Parts and supplies
These links search for related products. Check your year, engine, specification, and fitment with the seller before ordering.
BMW 330i coolant
Confirm the specification and fitment for your exact vehicle before ordering.
We earn a small commission if you buy through these links — at zero extra cost to you. These are search results, not verified vehicle-specific recommendations.
Coolant Service — Manual's Parts List
Flush or top-off — here is exactly what you need.
- 1Engine CoolantShop →
4.45 QTS. (4.21 L) — Frostox H — verify concentrate vs pre-mixed
- 2Distilled WaterShop →
If using concentrate — never use tap water
- 3Spill-Free FunnelShop →
Bleeds air from the heater core automatically
- 4Hose Clamp PliersShop →
Spring clamps are a pain without these
- 5Shop RagsShop →
Coolant is slippery — clean spills immediately
Get everything at once
Search results vary; confirm each item and its fitment before buying.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Engine Coolant / Antifreeze
Match the color/spec (e.g. OAT, HOAT) to your car.
Spill-Free Funnel
The best way to bleed air from the cooling system.
Coolant Tester
Check the freeze and boil protection level.
Hose Clamp Pliers
Helps move spring clamps without mangling hoses.
Shop Towels
Cleanup gear for coolant drips and burps.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your BMW 330i so the job is ready when the parts arrive.
Frequently Asked Questions
- Where is this data from?
- Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
- What coolant type does a BMW 330i use?
- 2019-2024 BMW 330i coolant: 4.45 QTS. (4.21 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)..
- Can I use universal coolant in a BMW 330i?
- Factory manuals specify exact coolant chemistry for the BMW 330i. Using the wrong coolant type can cause corrosion, overheating, or gasket damage. Always match the OEM specification exactly — do not mix incompatible coolant types.
Find your service manual
Select your vehicle and check the available manual sections for your exact configuration.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-10-31