Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Bmw 230i 2d Coupe Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2017-2021 (2017-2021).
Quick Answer
Automatic Transmission Fluid
9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3
Brake Fluid
— BMW Brake Fluid DOT 4 with low viscosity
Differential Gear Oil
— Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC) Note: BMW Part No. 83 22 2 365 988.
Engine Coolant (Automatic Trans)
8.56 QTS. (8.1 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
Engine Coolant
3.80 QTS. (3.59 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
Engine Oil
5.60 QTS. (5.29 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20
Manual Transmission Fluid
1.37 QTS. (1.29 L) — Manual Gearbox Oil MTF-LT-5 Note: BMW Part No. 83 22 2 156 969.
Engine Coolant (Standard Trans)
8.98 QTS. (8.49 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
Notes
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →BMW Part No. 83 22 2 365 988.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →BMW Part No. 83 22 2 156 969.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
This vehicle's factory manual
The spec is above. This opens the 2021 Bmw factory books so you can go into the 230i 2d Coupe procedure.
Related for Your 2021 Bmw 230i 2d Coupe
Frequently Asked Questions
- What are the fluid capacities for a 2021 Bmw 230i 2d Coupe?
- The 2021 Bmw 230i 2d Coupe fluid capacities are: Automatic Transmission Fluid: 9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3, Brake Fluid: — BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: — Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC) Note: BMW Part No. 83 22 2 365 988., Engine Coolant (Automatic Trans): 8.56 QTS. (8.1 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)., Engine Coolant: 3.80 QTS. (3.59 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)., Engine Oil: 5.60 QTS. (5.29 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20, Manual Transmission Fluid: 1.37 QTS. (1.29 L) — Manual Gearbox Oil MTF-LT-5 Note: BMW Part No. 83 22 2 156 969., Engine Coolant (Standard Trans): 8.98 QTS. (8.49 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)..
- How much engine oil does a 2021 Bmw 230i 2d Coupe take?
- The 2021 Bmw 230i 2d Coupe takes 5.60 QTS. (5.29 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20.