Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Volvo Xc40Coolant Type & Capacity
OEM spec from the factory service manual for the T4 Inscription variant.
Quick Answer
Coolant Type
50/50 mixture of VOLVO Antifreeze/Coolant or equivalent coolant with corrosion inhibitor and water
Capacity
N/A
N/A
Variant
T4 Inscription
Note: The level should not exceed the yellow MAX mark inside the expansion tank.
This vehicle's factory manual
2020 Volvo Xc40: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2020 Volvo Xc40
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2020 Volvo Xc40 take?
- The 2020 Volvo Xc40 requires 50/50 mixture of VOLVO Antifreeze/Coolant or equivalent coolant with corrosion inhibitor and water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the T4 Inscription configuration.
- How much coolant does a 2020 Volvo Xc40 hold?
- The 2020 Volvo Xc40 cooling system capacity is N/A (N/A).
- Can I use universal coolant in my 2020 Volvo Xc40?
- It is strongly recommended to use coolant that meets the 50/50 mixture of VOLVO Antifreeze/Coolant or equivalent coolant with corrosion inhibitor and water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2020 Volvo Xc40?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.