Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Volkswagen Atlas CrossCoolant Type & Capacity
OEM spec from the factory service manual for the SE, 2.0L Eng VIN C, AWD variant.
Quick Answer
Coolant Type
See manual
Capacity
21.10 QTS.
19.96 L
Variant
SE, 2.0L Eng VIN C, AWD
Note: Part No. G 013 A8J M1.
Part numbers are for reference only.
Approximate capacity.
This vehicle's factory manual
2020 Volkswagen Atlas Cross: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Related for Your 2020 Volkswagen Atlas Cross
Frequently Asked Questions
- What type of coolant does a 2020 Volkswagen Atlas Cross take?
- The 2020 Volkswagen Atlas Cross uses an OEM-specified coolant. Refer to the factory service manual for the exact type, as it varies by engine variant.
- How much coolant does a 2020 Volkswagen Atlas Cross hold?
- The 2020 Volkswagen Atlas Cross cooling system capacity is 21.10 QTS. (19.96 L).
- Can I use universal coolant in my 2020 Volkswagen Atlas Cross?
- Always use coolant that meets the OEM specification for your engine. Universal coolants may not provide adequate corrosion protection.
- What happens if I use the wrong coolant in my 2020 Volkswagen Atlas Cross?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.