Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Toyota HighlanderOil Type & Capacity
OEM spec from the factory service manual for the Hybrid LE, 2.5L Eng VIN A variant.
Quick Answer
Oil Type
$TOYOTA Genuine Motor Oil. SAE 0W-16
Capacity (w/ Filter)
4.60 QTS.
4.35 L
Variant
Hybrid LE, 2.5L Eng VIN A
Note: SAE 0W-16 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-16 is not available, SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change.
This vehicle's factory manual
The oil spec is above. This opens the fluids section of the 2020 Toyota Highlander Hybrid LE, 2.5L Eng VIN A factory book.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2020 Toyota Highlander
Frequently Asked Questions
- What type of oil does a 2020 Toyota Highlander take?
- The 2020 Toyota Highlander requires TOYOTA Genuine Motor Oil. SAE 0W-16. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Hybrid LE, 2.5L Eng VIN A configuration.
- How much oil does a 2020 Toyota Highlander need?
- The 2020 Toyota Highlander takes 4.60 QTS. (4.35 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2020 Toyota Highlander?
- Yes — synthetic oil that meets the TOYOTA Genuine Motor Oil. SAE 0W-16 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2020 Toyota Highlander?
- Using oil that does not meet the TOYOTA Genuine Motor Oil. SAE 0W-16 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.