Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Tesla Model SCoolant Type & Capacity
OEM spec from the factory service manual for the Long Range variant.
Quick Answer
Coolant Type
Ethylene Glycol Coolant - 50/50 mix - 1 Gallon 1029320-00-A
Capacity
N/A
N/A
Variant
Long Range
Note: Approximate Dry Fill Coolant Capacity: 18.20 qts - 20.92 qts.
The overall concentration of ethylene glycol should not fall below 50% by volume to make sure that the anti-corrosion properties of the coolant are maintained.
This vehicle's factory manual
2020 Tesla Model S: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2020 Tesla Model S
Frequently Asked Questions
- What type of coolant does a 2020 Tesla Model S take?
- The 2020 Tesla Model S requires Ethylene Glycol Coolant - 50/50 mix - 1 Gallon 1029320-00-A. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Long Range configuration.
- How much coolant does a 2020 Tesla Model S hold?
- The 2020 Tesla Model S cooling system capacity is N/A (N/A).
- Can I use universal coolant in my 2020 Tesla Model S?
- It is strongly recommended to use coolant that meets the Ethylene Glycol Coolant - 50/50 mix - 1 Gallon 1029320-00-A specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2020 Tesla Model S?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.