Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Subaru OutbackOil Type & Capacity
OEM spec from the factory service manual for the Base variant.
Quick Answer
Oil Type
$ILSAC GF-4 or GF-5, API - SAE 0W-20 Synthetic Engine Oil
Capacity (w/ Filter)
4.40 QTS.
4.16 L
Variant
Base
Note: If 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change.
This vehicle's factory manual
The oil spec is above. This opens the fluids section of the 2020 Subaru Outback Base factory book.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2020 Subaru Outback
Frequently Asked Questions
- What type of oil does a 2020 Subaru Outback take?
- The 2020 Subaru Outback requires ILSAC GF-4 or GF-5, API - SAE 0W-20 Synthetic Engine Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base configuration.
- How much oil does a 2020 Subaru Outback need?
- The 2020 Subaru Outback takes 4.40 QTS. (4.16 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2020 Subaru Outback?
- Yes — synthetic oil that meets the ILSAC GF-4 or GF-5, API - SAE 0W-20 Synthetic Engine Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2020 Subaru Outback?
- Using oil that does not meet the ILSAC GF-4 or GF-5, API - SAE 0W-20 Synthetic Engine Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.