2020 Mitsubishi OutlanderOil Type & Capacity

OEM spec from the factory service manual for the ES, AWD variant.

Quick Answer

Oil Type

$ILSAC, API - SAE 0W-20 Synthetic Engine Oil

Capacity (w/ Filter)

4.82 QTS.

4.56 L

Variant

ES, AWD

Note: SAE 0W-20 engine oil is strongly recommended for optimum fuel economy and cold starting. If it's not available the ILSAC certification oil of other viscosity grades can be used temporarily. If SAE 0W-20 Synthetic Engine Oil is not available, 5W-20 grade oils displaying the ILSAC certification can be used.

This vehicle's factory manual

2020 Mitsubishi Outlander: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.
Other specs:All specsCoolant

Related for Your 2020 Mitsubishi Outlander

Frequently Asked Questions

What type of oil does a 2020 Mitsubishi Outlander take?
The 2020 Mitsubishi Outlander requires ILSAC, API - SAE 0W-20 Synthetic Engine Oil. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the ES, AWD configuration.
How much oil does a 2020 Mitsubishi Outlander need?
The 2020 Mitsubishi Outlander takes 4.82 QTS. (4.56 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2020 Mitsubishi Outlander?
Yes β€” synthetic oil that meets the ILSAC, API - SAE 0W-20 Synthetic Engine Oil specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2020 Mitsubishi Outlander?
Using oil that does not meet the ILSAC, API - SAE 0W-20 Synthetic Engine Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.