Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Mercedes-Benz Slc300Coolant Type & Capacity
OEM spec from the factory service manual for the Base variant.
Quick Answer
Coolant Type
MB 325.0 or MB 326.0 Antifreeze/Corrosion Inhibitor
Capacity
8.50 QTS.
8.04 L
Variant
Base
Note: Only use products recommended by Mercedes Benz.
Approximate capacity.
This vehicle's factory manual
2020 Mercedes-Benz Slc300: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Related for Your 2020 Mercedes-Benz Slc300
Frequently Asked Questions
- What type of coolant does a 2020 Mercedes-Benz Slc300 take?
- The 2020 Mercedes-Benz Slc300 requires MB 325.0 or MB 326.0 Antifreeze/Corrosion Inhibitor. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base configuration.
- How much coolant does a 2020 Mercedes-Benz Slc300 hold?
- The 2020 Mercedes-Benz Slc300 cooling system capacity is 8.50 QTS. (8.04 L).
- Can I use universal coolant in my 2020 Mercedes-Benz Slc300?
- It is strongly recommended to use coolant that meets the MB 325.0 or MB 326.0 Antifreeze/Corrosion Inhibitor specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2020 Mercedes-Benz Slc300?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.