2020 Lexus LSCoolant Type & Capacity

OEM spec from the factory service manual for the Base, AWD variant.

Quick Answer

Coolant Type

TOYOTA Super Long Life Coolant or Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology

Capacity

11.10 QTS.

10.5 L

Variant

Base, AWD

Note: DO NOT use plain water alone.
Source: Factory service manual β€” 2020 Lexus LS Base, AWD. View full manual section β†’

Frequently Asked Questions

What type of coolant does a 2020 Lexus LS take?
The 2020 Lexus LS requires TOYOTA Super Long Life Coolant or Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the Base, AWD configuration.
How much coolant does a 2020 Lexus LS hold?
The 2020 Lexus LS cooling system capacity is 11.10 QTS. (10.5 L).
Can I use universal coolant in my 2020 Lexus LS?
It is strongly recommended to use coolant that meets the TOYOTA Super Long Life Coolant or Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
What happens if I use the wrong coolant in my 2020 Lexus LS?
Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.