Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Land Rover DiscoveryCoolant Type & Capacity
OEM spec from the factory service manual for the HSE Luxury, 3.0L Eng VIN K variant.
Quick Answer
Coolant Type
50/50 mixture of HAVOLINE XLC Antifreeze and Water
Capacity
1.60 QTS.
1.51 L
Variant
HSE Luxury, 3.0L Eng VIN K
This vehicle's factory manual
2020 Land Rover Discovery: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Related for Your 2020 Land Rover Discovery
Maintenance Specs
Frequently Asked Questions
- What type of coolant does a 2020 Land Rover Discovery take?
- The 2020 Land Rover Discovery requires 50/50 mixture of HAVOLINE XLC Antifreeze and Water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the HSE Luxury, 3.0L Eng VIN K configuration.
- How much coolant does a 2020 Land Rover Discovery hold?
- The 2020 Land Rover Discovery cooling system capacity is 1.60 QTS. (1.51 L).
- Can I use universal coolant in my 2020 Land Rover Discovery?
- It is strongly recommended to use coolant that meets the 50/50 mixture of HAVOLINE XLC Antifreeze and Water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2020 Land Rover Discovery?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.