Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Land Rover DefenderOil Type & Capacity
OEM spec from the factory service manual for the 110, 2.0L Eng VIN X variant.
Quick Answer
Oil Type
$SAE 0W-20 Engine oil conforming to Land Rover oil specification: STJLR 03.5006, or STJLR.51.5122
Capacity (w/ Filter)
7.42 QTS.
7.02 L
Variant
110, 2.0L Eng VIN X
This vehicle's factory manual
2020 Land Rover Defender: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2020 Land Rover Defender
Maintenance Specs
Frequently Asked Questions
- What type of oil does a 2020 Land Rover Defender take?
- The 2020 Land Rover Defender requires SAE 0W-20 Engine oil conforming to Land Rover oil specification: STJLR 03.5006, or STJLR.51.5122. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 110, 2.0L Eng VIN X configuration.
- How much oil does a 2020 Land Rover Defender need?
- The 2020 Land Rover Defender takes 7.42 QTS. (7.02 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2020 Land Rover Defender?
- Yes — synthetic oil that meets the SAE 0W-20 Engine oil conforming to Land Rover oil specification: STJLR 03.5006, or STJLR.51.5122 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2020 Land Rover Defender?
- Using oil that does not meet the SAE 0W-20 Engine oil conforming to Land Rover oil specification: STJLR 03.5006, or STJLR.51.5122 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.