Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Hyundai PalisadeOil Type & Capacity
OEM spec from the factory service manual for the Limited, 4WD variant.
Quick Answer
Oil Type
ACEA A5 or above. SAE 5W-30
Capacity (w/ Filter)
6.87 QTS.
6.5 L
Variant
Limited, 4WD
Note: For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W-30 (ACEA A5).
If the ACEA A5 engine oil is not available in your country, you are able to use API SM & ILSAC GF-4 (or above) or API SL & ILSAC GF-
Source: Factory service manual — 2020 Hyundai Palisade Limited, 4WD. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2020 Hyundai Palisade take?
- The 2020 Hyundai Palisade requires ACEA A5 or above. SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Limited, 4WD configuration.
- How much oil does a 2020 Hyundai Palisade need?
- The 2020 Hyundai Palisade takes 6.87 QTS. (6.5 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2020 Hyundai Palisade?
- Yes — synthetic oil that meets the ACEA A5 or above. SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2020 Hyundai Palisade?
- Using oil that does not meet the ACEA A5 or above. SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.