Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Ford TransitCoolant Type & Capacity
OEM spec from the factory service manual for the XL, Van Cargo, 2.0L Eng VIN 2, Gas variant.
Quick Answer
Coolant Type
Original Fluid: MOTORCRAFT Orange Concentrated Antifreeze/Coolant. Service Fluid: MOTORCRATF Yellow Prediluted Antifreeze/Coolant.
Capacity
8.06 QTS.
7.62 L
Variant
XL, Van Cargo, 2.0L Eng VIN 2, Gas
Source: Factory service manual — 2020 Ford Transit XL, Van Cargo, 2.0L Eng VIN 2, Gas. View full manual section →
What You'll Need
Engine Coolant / Antifreeze
Original Fluid: MOTORCRAFT Orange Concentrated Antifreeze/Coolant. Service Fluid: MOTORCRATF Yellow Prediluted Antifreeze/Coolant. for Ford Transit
Search Amazon →
Tool
Spill-Free Coolant Funnel
Search Amazon →
Tester
Coolant Tester / Hydrometer
Search Amazon →
Drain Pan
Coolant Drain Pan
Search Amazon →
Frequently Asked Questions
- What type of coolant does a 2020 Ford Transit take?
- The 2020 Ford Transit requires Original Fluid: MOTORCRAFT Orange Concentrated Antifreeze/Coolant. Service Fluid: MOTORCRATF Yellow Prediluted Antifreeze/Coolant.. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the XL, Van Cargo, 2.0L Eng VIN 2, Gas configuration.
- How much coolant does a 2020 Ford Transit hold?
- The 2020 Ford Transit cooling system capacity is 8.06 QTS. (7.62 L).
- Can I use universal coolant in my 2020 Ford Transit?
- It is strongly recommended to use coolant that meets the Original Fluid: MOTORCRAFT Orange Concentrated Antifreeze/Coolant. Service Fluid: MOTORCRATF Yellow Prediluted Antifreeze/Coolant. specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2020 Ford Transit?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.