How much brake fluid does a 2020 Ford Police Interceptor Utility 3.3l Eng Vin B take?

Refer to the factory service manual for the exact brake fluid capacity.

When should I change the brake fluid in my 2020 Ford Police Interceptor Utility 3.3l Eng Vin B?

Most manufacturers recommend brake fluid replacement every 2-3 years regardless of mileage to prevent moisture absorption.

Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2020 Ford Police Interceptor Utility 3.3l Eng Vin BBrake Fluid Type & Capacity

OEM brake fluid spec from the factory service manual for the 2020-2022 (2020-2022).

Quick Answer

Fluid Type

— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.

Notes

→Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.

Source: Factory service manual — 2020 Ford Police Interceptor Utility 3.3l Eng Vin B 2020-2022.

Other specs:All specs Oil Type Coolant Tire Size Spark Plugs Trans Fluid Capacities

This vehicle's factory manual

2020 Ford Police Interceptor Utility 3.3l Eng Vin B: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

What You'll Need

Brake Fluid

Ford Police Interceptor Utility 3.3l Eng Vin B — MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.

Search Amazon →

Tool

One-Person Brake Bleeder Kit

Search Amazon →

Related for Your 2020 Ford Police Interceptor Utility 3.3l Eng Vin B

Maintenance Specs

🛢️Oil Type & Capacity ❄️Coolant Type 🔘Tire Size ⚡Spark Plug Type ⚙️Transmission Fluid 🧪Fluid Capacities

Quick Actions

🏠2020 Ford Police Interceptor Utility 3.3l Eng Vin B Hub 🛠️All Repair Guides 🤖AI Diagnosis

Frequently Asked Questions

What brake fluid does a 2020 Ford Police Interceptor Utility 3.3l Eng Vin B use?: The 2020 Ford Police Interceptor Utility 3.3l Eng Vin B uses — MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir. brake fluid.
How much brake fluid does a 2020 Ford Police Interceptor Utility 3.3l Eng Vin B take?: Refer to the factory service manual for the exact brake fluid capacity.
When should I change the brake fluid in my 2020 Ford Police Interceptor Utility 3.3l Eng Vin B?: Most manufacturers recommend brake fluid replacement every 2-3 years regardless of mileage to prevent moisture absorption.