Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Ford Police Interceptor Utility 3.0l Eng Vin C Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2020 (2020).
Quick Answer
Air Cond Compressor Oil
5.92 OZS. (0.17 L) — PAG 46
Automatic Transmission Fluid (Gas)
14.30 QTS. (13.53 L) — MOTORCRAFT Automatic Transmission Fluid MERCON ULV
Brake Fluid
— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent.
Differential Gear Oil
1.90 QTS. (1.79 L) — MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant
Engine Coolant (3.0L Eng)
15.50 QTS. (14.66 L) — MOTORCRAFT Yellow Antifreeze/Coolant Prediluted
Engine Oil (3.0L Eng)
6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil
Transfer Case Fluid
1.10 QTS. (1.04 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV
Notes
- →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add the coolant type originally equipped in the vehicle.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
- →Follow the Manufacturer's Instructions for the mixture ratio.
This vehicle's factory manual
2020 Ford Police Interceptor Utility 3.0l Eng Vin C: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2020 Ford Police Interceptor Utility 3.0l Eng Vin C
Frequently Asked Questions
- What are the fluid capacities for a 2020 Ford Police Interceptor Utility 3.0l Eng Vin C?
- The 2020 Ford Police Interceptor Utility 3.0l Eng Vin C fluid capacities are: Air Cond Compressor Oil: 5.92 OZS. (0.17 L) — PAG 46, Automatic Transmission Fluid (Gas): 14.30 QTS. (13.53 L) — MOTORCRAFT Automatic Transmission Fluid MERCON ULV, Brake Fluid: — MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent., Differential Gear Oil: 1.90 QTS. (1.79 L) — MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant, Engine Coolant (3.0L Eng): 15.50 QTS. (14.66 L) — MOTORCRAFT Yellow Antifreeze/Coolant Prediluted, Engine Oil (3.0L Eng): 6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil, Transfer Case Fluid: 1.10 QTS. (1.04 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV.
- How much engine oil does a 2020 Ford Police Interceptor Utility 3.0l Eng Vin C take?
- Engine oil capacity depends on the engine and whether the filter is changed. Check the applicable manual for your exact vehicle and service procedure before filling.