What type of oil does a 2020 Ford Expedition take?

The 2020 Ford Expedition requires MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the King Ranch, 4WD configuration.

How much oil does a 2020 Ford Expedition need?

The 2020 Ford Expedition takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.

Can I use synthetic oil in my 2020 Ford Expedition?

Yes — synthetic oil that meets the MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.

What happens if I use the wrong oil in my 2020 Ford Expedition?

Using oil that does not meet the MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.

Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2020 Ford ExpeditionOil Type & Capacity

OEM spec from the factory service manual for the King Ranch, 4WD variant.

Quick Answer

Oil Type

$MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil

Capacity (w/ Filter)

6.00 QTS.

5.67 L

Variant

King Ranch, 4WD

Note: SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F).

This vehicle's factory manual

The oil spec is above. This opens the fluids section of the 2020 Ford Expedition King Ranch, 4WD factory book.

Open the 2020 Ford manual

Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.

Other specs:All specs Coolant Tire Size Belt Spark Plugs Trans Fluid Brake Fluid Capacities

What You'll Need

Engine Oil

$MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil for Ford Expedition

Search Amazon →

Oil Filter

Related for Your 2020 Ford Expedition

Maintenance Specs

❄️Coolant Type 🔘Tire Size ⚡Spark Plug Type ⚙️Transmission Fluid ⚙️Serpentine Belt 🚨Brake Fluid 🧪Fluid Capacities

Quick Actions

🏠2020 Ford Expedition Hub 🛠️All Repair Guides 🤖AI Diagnosis

Frequently Asked Questions

What type of oil does a 2020 Ford Expedition take?: The 2020 Ford Expedition requires MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the King Ranch, 4WD configuration.
How much oil does a 2020 Ford Expedition need?: The 2020 Ford Expedition takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2020 Ford Expedition?: Yes — synthetic oil that meets the MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2020 Ford Expedition?: Using oil that does not meet the MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.