Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Ford EscapeOil Type & Capacity
OEM spec from the factory service manual for the SEL, 1.5L Eng VIN 6, 4WD variant.
Quick Answer
Oil Type
$MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil
Capacity (w/ Filter)
5.30 QTS.
5.01 L
Variant
SEL, 1.5L Eng VIN 6, 4WD
Note: Approximate capacity.
Alternative Engine Oil for Extremely Cold Climates: SAE 0W-20 Full Synthetic Motor Oil.
This vehicle's factory manual
The oil spec is above. This opens the fluids section of the 2020 Ford Escape SEL, 1.5L Eng VIN 6, 4WD factory book.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2020 Ford Escape
Frequently Asked Questions
- What type of oil does a 2020 Ford Escape take?
- The 2020 Ford Escape requires MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the SEL, 1.5L Eng VIN 6, 4WD configuration.
- How much oil does a 2020 Ford Escape need?
- The 2020 Ford Escape takes 5.30 QTS. (5.01 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2020 Ford Escape?
- Yes — synthetic oil that meets the MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2020 Ford Escape?
- Using oil that does not meet the MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.