Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Ford EdgeCoolant Type & Capacity
OEM spec from the factory service manual for the SE, 4WD variant.
Quick Answer
Coolant Type
MOTORCRAFT Yellow Antifreeze/Coolant Prediluted.
Capacity
10.40 QTS.
9.84 L
Variant
SE, 4WD
Note: Indicates only approximate dry fill capacity. Some applications may vary.
This vehicle's factory manual
The coolant spec is above. This opens the fluids section of the 2020 Ford Edge SE, 4WD factory book.
What You'll Need
Related for Your 2020 Ford Edge
Frequently Asked Questions
- What type of coolant does a 2020 Ford Edge take?
- The 2020 Ford Edge requires MOTORCRAFT Yellow Antifreeze/Coolant Prediluted.. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the SE, 4WD configuration.
- How much coolant does a 2020 Ford Edge hold?
- The 2020 Ford Edge cooling system capacity is 10.40 QTS. (9.84 L).
- Can I use universal coolant in my 2020 Ford Edge?
- It is strongly recommended to use coolant that meets the MOTORCRAFT Yellow Antifreeze/Coolant Prediluted. specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2020 Ford Edge?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.