Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Buick EnclaveOil Type & Capacity
OEM spec from the factory service manual for the Avenir, AWD variant.
Quick Answer
Oil Type
API - SAE 5W-30
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
Avenir, AWD
Note: Engine oil meeting the Dexos1 specification of proper SAE viscosity grade. ACDexos1 full synthetic is recommended.
In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Source: Factory service manual — 2020 Buick Enclave Avenir, AWD. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2020 Buick Enclave take?
- The 2020 Buick Enclave requires API - SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Avenir, AWD configuration.
- How much oil does a 2020 Buick Enclave need?
- The 2020 Buick Enclave takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2020 Buick Enclave?
- Yes — synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2020 Buick Enclave?
- Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.