Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 BMW Z4Oil Type & Capacity
OEM spec from the factory service manual for the M40i First Edition variant.
Quick Answer
Oil Type
BMW TwinPower Turbo LL17FE+ 0W-20, BMW Part No. 83 21 2 461 988
Capacity (w/ Filter)
6.86 QTS.
6.49 L
Variant
M40i First Edition
Source: Factory service manual — 2020 BMW Z4 M40i First Edition. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2020 BMW Z4 take?
- The 2020 BMW Z4 requires BMW TwinPower Turbo LL17FE+ 0W-20, BMW Part No. 83 21 2 461 988. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the M40i First Edition configuration.
- How much oil does a 2020 BMW Z4 need?
- The 2020 BMW Z4 takes 6.86 QTS. (6.49 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2020 BMW Z4?
- Yes — synthetic oil that meets the BMW TwinPower Turbo LL17FE+ 0W-20, BMW Part No. 83 21 2 461 988 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2020 BMW Z4?
- Using oil that does not meet the BMW TwinPower Turbo LL17FE+ 0W-20, BMW Part No. 83 21 2 461 988 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.